Pretreatment, Splitting and Analysis of the Fatty Acid Composition of Jatropha Oil
Cheguru Snehalatha *
Department of Chemistry, St. Anns College for Women, Mehidipatnam, Hyderabad 500038, Telangana, Hyderabad-500076, India.
*Author to whom correspondence should be addressed.
Abstract
Background: Jatropha curcas L. oil is a non-edible lipid feedstock with potential applications in oleochemical processing. Pretreatment can reduce impurities before the hydrolysis of triglycerides to release fatty acids.
Objective: This study assessed degumming, bleaching, three-stage high-pressure splitting and the fatty acid composition of Jatropha oil.
Methods: Crude oil was degummed using 2% water and 0.5% phosphoric acid at 80°C for 1 h. Degummed oil was bleached with 2% bleaching earth and 0.5% activated carbon at 100°C for 1 h. The bleached oil was hydrolysed in a high-pressure autoclave at 220°C, with removal of the aqueous phase and addition of fresh water between stages. Physicochemical properties were measured during processing, and the final split product was converted to methyl esters for gas chromatographic analysis.
Results: Phosphorus content declined from 100 ppm in crude oil to 65 ppm after degumming and 30 ppm after bleaching, while the colour index declined from 51.5 to 33.5. The first, second and third splitting stages yielded reported splitting percentages of 82%, 93% and 96%, respectively. Oleic acid (43.0%) and linoleic acid (32.0%) were the predominant components, followed by palmitic acid (15.8%) and stearic acid (7.9%).
Conclusion: The treatment sequence produced a highly split fatty acid mixture dominated by oleic and linoleic acids under the stated conditions. These findings describe the tested material without establishing comparative process performance or suitability for specific downstream applications.
Keywords: Jatropha curcas, non-edible vegetable oil, degumming, bleaching, high-pressure splitting, triglyceride hydrolysis, fatty acid composition, gas chromatography, oleic acid, linoleic acid